Build Guide Overview

This following is a detailed instruction manual to completely reconstruct a Rover if necessary. Each step in the guide represents a small number of actions required to build the Rover.

To build the Rover you need the following tools:

• A screwdriver with an M3 and M2.5 bit or equivalent hex keys
• Pliers

The guide shows each step that requires a screwdriver with an orange circle. These are structured in a consistent format:

• Screws: 4x M3x6
  • Meaning: 4 M3 screws of length 6mm
• Nuts: 4x M3
  • Meaning: 4 M3 nuts
• Offsets: 12x M3x40 offsets
  • Meaning: 12 M3 (brass) offsets of length 40mm

Download Build Guide

You can download all the drawings from the build guide as a PDF by clicking the button below:

Build Guide